Motor:8 inch BLDC gear motor
Speed:2.5-7km/h (You can choose whatever you want.)
Maximum carrying capacity:100kg
Adapter battery:24V 6.6AH (36V 6.6AH available MOQ 10 SETS)
Gross weight:about 6kg
Whole package:about 11kg
1,Multitronic button,You can choose the speed what you want (2.5km/h ——7km/h).
2,Emergency brake button available.
3,Climbing angles = 8° .
4,Power button now ahead that near the hand.
5,Easy to install..No addtional tools are requirement.
6,When the wheelchair backward sliding, the controller will automatically lock the motor, the faster backward sliding speed, the greater lock force for motor, to prevent the wheelchair backward sliding.
7. It can be fit on essentially any make and type of wheelchair, including folding, tilt-in space, one-arm drive and standing.
Step 1, Please make sure that your wheelchair have vertical supports on either side.Just prepare gloves .No additional tools are required.Install the holder.
Attention : Please face the wide side to yourself.
Step 2, Install another black holder.Please make sure it is installed in the middle.And it is fixed.
Step 3,Install the tractor(Wheelchair Motor).
Step 4,Install the control button on the side of right hand or left hand.Both is OK.All depend on yourself.The straps are elastic and fit on any size armrest.Easy to install.
Step 5,Tidy up the messy wires .Finish.There is a very important caveat before using it.